Mobile MRT-Container by inmed

YOUR MRI CONTAINER – AVAILABLE ANYTIME, ANYWHERE

The SPinCUBE is easy to load and fast to transport. Its compact dimensions and moderate weight make special transport unnecessary. A conventional crane is sufficient for loading and unloading. As a result of this easy handling, you quickly have a fully-fledged MRI solution at your disposal on-site.

Your self-contained MRI station!

REACHES ITS GOAL WORLDWIDE

The SPinCUBE was conceived as a special container for magnetic resonance imaging and is equipped accordingly. It can be transported, connected up, and used all over the globe. Before shipping, the container is adapted to the conditions in the target country corresponding to your specifications. The SPinCUBE works accurately and reliably in the most diverse climates. For use in residential areas, quieter equipment is available that meets the noise protection regulations of the respective location.

ALL YOU NEED IS POWER

The SPinCUBE can be used anywhere quickly. It arrives fully functioning and is ready for immediate operation. In accordance with the motto “plug & play”, all you need is an adequate power supply. Once you have established a network connection, you can start examining your patients.

FREELY SCALABLE TO YOUR REQUIREMENTS

The SPinCUBE is configured according to your needs, both in terms of the technical equipment and the design. The MRI scanners supplied for the SPinCUBE are currently the SIEMENS® models Symphony, Symphony TIM and Avanto. Every SPinCUBE comes equipped with an RF cabin and magnetic shielding. The interior design can be customized to your preferences. The SPinCUBE is supplied in three lengths with standard equipment, which can be extended if required. We also offer a variety of possibilities for the interior design as well as optional additions and functions. You can freely select the location of the window and the door to the operator’s room. With SPinCUBE long, the room layout is also variable.

STANDARD MODEL

  • Interior finishing
  • RF cabin consisting of:
    – 2 RF doors
    – Revision window incl. cover
    – RF window (operator’s room)
    – 3 LED panels
    – Antistatic floor
    – Interior design
  • Chiller incl. installation
  • Air conditioning with temperature control via touch panel
  • Electrical installations
  • Insulation (max. permissible ambient temperature -35° C to +65° C)
  • Revision window incl. cover on the roof
  • Exterior window in the operator’s room
  • 2 doors (operator’s and technical room)
  • RF coil storage
  • External lamp at rear of container
  • Stereo with loudspeakers, which can be connected to patient’s headphone

CHOOSE BETWEEEN

  • – Short table with chair and dressing room
    – Long table with 2 chairs without dressing room
  • Wall units (operator’s room)
  • Smoke detector (technical and operator’s room)
  • Electric heating

SPECIAL INTERIOR DESIGN

  • Multi-colored floor/walls (e.g. with marking of 5-Gauß-line)
  • Daylight panel (ceiling/walls)
  • Landscape panel (ceiling/walls)
  • Dimmer in the operator’s room
  • Glazed entrance door to the operator’s room
  • Additional window
  • Oxygen monitor
  • Ceiling in various designs

ADDITIONAL OPTIONS AND FUNCTIONS

  • Backup generator for helium compressor and cold head
  • Viewer system
  • Laminated exterior walls incl. print
  • Outdoor light (entrance door to the operator’s room)
  • Canopy
  • Bell
  • Anti-theft alarm
  • MaReMo (Magnet Remote Monitoring)
  • Switching to municipal water supply